Shure ULXD microphone

Equipment characteristics were generated using automatic translation from the seller’s website.

Smart performance meets digital audio enhancement in one wireless package. Shure ULXD digital wireless systems offer uncompromising audio quality RF signal stability and advanced configuration features in a compact 1U rackmount unit. The ULXD4D-G50 two-channel digital receiver (470-536 MHz) reproduces sound exactly at the source Provides scalable control of your fixed or installed sound system 24-bit digital audio, wide frequency range AES-256 encryption and robust RF interference protection, even in conference calls. Optimize your workflow; ULXD is compatible with Wireless Workbench 6 channel monitoring applications System
On and Shure
Plus. This two-channel receiver also supports Dante digital audio networking. Durable but the lightweight chassis is equipped with independent audio and RF meters gain control and receiver outputs which can be direct or summed for flexible signal routing. Paired with this rock-solid receiver are two ULXD wireless bodypacks and two MX153T/O-TQG ultra-miniature headphone microphones. Transmitter functions designed to be discreet and unnoticeable to presenters include 256-bit AES encryption and proprietary Shure gain control to optimize dynamic range for any input source. This wireless kit is ULXD equipped with optimal rechargeable lithium-ion batteries is an essential choice for ensuring clear images in conferences and convention centers. ULXD Dual Channel Wireless Head Worn Kit includes (1) ULXD4D-G50 ULX-D Series Dual Channel Digital Wireless Microphone Receiver G50 band (470-536 MHz) (2) ULXD1-G50 ULX-D Series Digital Wireless Bodypack Transmitter G50 range (470-534 MHz) (2) MX153T/O-TQG omnidirectional condenser headset microphone brown (2) SB900A Li-ion battery (1) SBC210-US dual bay portable charger Shure ULXD14D/MX53-G50 Features Powered by MX153/O-TQG G50 band (470-534 MHz) headset microphone for superior audio clarity and improved explosion protection without proximity effect. Ultralight, comfortable The flexible design is stable and fits easily on any ear. Individual gain controls LED indicators and XLR outputs for each channel on the ULXD4D-G50 receiver. Dante digital network audio over Ethernet. 10 hours of battery life on one full charge of the SB900A lithium-ion battery. Charging a single SB900A battery via the SBC10-100-US using AC power supplies or USB ports. Specifications MX153T/O-TQG Omnidirectional headmount condenser microphone Specifications Transducer type: Electret condenser Polar pattern: Omnidirectional Frequency range; from 20 Hz to 20 kHz Output impedance: no. Sensitivity (open circuit voltage at 1 kHz typical value): -41 dBV/Pa (9 m
V). Maximum sound pressure level (1 toHz at THD 1%) Load 2500 Ohm: 107 dB SPL. 1000 Ohm load: 107 dB SPL Signal to noise ratio: 60 dB Dynamic range at 1 kHz 2500 Ohm load: 73 dB 1000 Ohm load: 73 dB Self-noise (equivalent sound pressure level, A-weighted typical): 34 in
B In operation Temperature range: 0–135 °F (-18–57 °C) Polarity: Positive pressure on the diaphragm creates a negative voltage on pin 3 relative to pin 1. Power Requirements: +5 VDC (minimum 130 µ
A). Weight: . 70 oz. ULXD1-G50 Digital Wireless Bodypack Transmitter Specifications: AUDIO INPUT: Connector: 4-pin mini-male (TA4M) Configuration: Unbalanced Impedance: 1 MΩ Maximum Input Level , 1 toHz at THD 1%: Pad Off: 8, 5 dBV (7, 5 Vpeak) Pad On: 20, 5 dBV (30 Vpeak) preamp equivalent input noise (EIN) system gain setting = +20 (120 dBV, A-weighted typical) RF OUTPUT: Connector: SMA Antenna Type: 1/4 wave Impedance: 50 ohms Occupied Bandwidth: <200 k
Hz Modulation Type: Shure Native Digital Power: 1m
W, 10m
W 20 m
W Frequency response of sound: from 20 Hz to 20 kHz (±1 dB) flat (depending on microphone type) Operating range: 300 ft (100 m) Connector: 3-pin TQG Gain offset range: 0 to 21 ind
B (in 3 inch increments
B) Battery type: Shure SB900 Li-ion batteries or AA batteries Dimensions (Hx
Wx
D): 3.4 x 2.6 x 0.9 inches Weight: 142 g (5.0 oz) no batteries Housing: Die-cast aluminum Dual channel receiver ULXD4D-G50 series Specifications: RF carrier range: 470-530 MHz RF tuning step size: 25 kHz, depends on region Image suppression:>70 dB typical RF sensitivity: −98 dBm at 10–5 BER AUDIO DYNAMIC RANGE: *A-weighted , typical system gain at +10 Analogue output XLR: >120 dB Digital output Dante: 130 dB Total harmonic distortion: input −12 dBFS System Gain at +10 System Audio Polarity: Positive pressure on the microphone diaphragm creates a positive voltage at pin 2 (relative to pin 3 of the XLR output) and at the end of output 6 35 mm (1/4 inch). Dimensions: 44 x 482 x 274 mm. Weight: ULXD4D 3.36 kg (7.4 lbs) without antennas. Case: steel; Power requirements for extruded aluminum: 100 to 240 VAC 50–60 Hz, max. 0.26 A. RF INPUT: Spurious signal suppression:>80 dB Typical Connector Type: BNC Impedance: 50 ohms Bias Voltage: 12 to 13 VDC maximum 150 m
A per antenna CASCADE OUTPUT: Connector type: BNC Configuration: Unbalanced passive Impedance: 50 Ohm Insertion loss: 0 dB AUDIO OUTPUT gain adjustment range: –18 to +42 dB in 1 inch increments
B (plus mute setting) Impedance: 100 ohms FULL SCALE OUTPUT LINE setting: +18 dBV MIC setting: –12 dBV Microphone/line switch: Panel 30 dB Phantom power protection: Yes NETWORK Network interface: Dual-port Ethernet 10/100 Mbps , 1 Gbit/s Dante digital audio system Network addressing capability: DHCP or manual IP address Maximum cable length: 100 m (328 ft) SB900A Li-ion battery specifications Dimensions (Hx
Lx
D): 1.25 x 1.98 x 0.67 inches (31.8 x 50.4 x 17.5 mm) Constant charge voltage: 4 2V Constant charge current: 750mAh Nominal voltage: 3.7V Weight: 1.4oz (39 7 g) SBC210-US 2 Portable Charger Specifications -Bay Battery Type: Up to 2 Li-Ion Batteries (SB900) Charging Time: 50% = 1 hour; 100% = 3 hours Dimensions: 1 8 x 3.4 x 4.5 inches Weight: 15 0 oz. no batteries or external power supply PS51 Housing: Cast and extruded aluminum Power requirements: 5 5VDC, 2.72A Consumer Warning Please Note that some systems or transmitters operating in the frequency ranges 617–652 MHz or 663–698 MHz no longer comply with latest regulations established by the Federal Communications Commission (FCC).