Shure ULXD microphone

Equipment characteristics were generated using automatic translation from the seller’s website.

Smart performance meets digital audio enhancement in one wireless package. Shure ULXD digital wireless systems offer uncompromising audio quality RF signal stability and advanced configuration features in a compact 1U rackmount unit. Reproduce sound exactly at the source two-channel digital receiver ULXD4D-G50 (470–536 MHz) offers scalable control of your fixed or installed sound system 24-bit digital audio, wide frequency range, AES-256 encryption and reliable RF protection against spurious interference, even in conference calls. Optimize your workflow; ULXD is compatible with Wireless Workbench 6 channel monitoring applications System
On and Shure
Plus. This two-channel receiver also supports Dante digital audio networking. Durable but the lightweight chassis is equipped with independent audio and RF meters gain control and receiver outputs which can be direct or summed for flexible signal routing. Paired with this unwavering receiver are two ULXD wireless bodypacks tuned to provide uncompromising sound quality and exceptional signal stability. This transmitter is made in a durable and lightweight aluminum housing Features 256-bit AES encryption and Shure's proprietary gain control system to optimize dynamic range for any input source. This wireless kit is ULXD equipped with optimal rechargeable lithium-ion batteries is an essential choice for ensuring clear images in conferences and convention centers. ULXD Dual Channel Wireless Kit includes (1) ULXD4D-G50 ULX-D Series Dual Channel Digital Wireless Microphone Receiver G50 band (470-536 MHz) (2) ULXD1-G50 ULX-D Series Digital Wireless Bodypack Transmitter G50 band (470-534 MHz) (2) SB900A Li-ion battery (1) SBC210-US dual-bay portable charger Shure ULXD14D-G50 specifications Operates in G50 band (470-532 MHz) 256-bit AES encryption for Secure transfer Backlit LCD display with easy to navigate menus and controls. Individual gain controls LED indicators and XLR outputs for each channel on the ULXD4D-G50 receiver. Dante digital audio networking over Ethernet. 10 hours of operation from one full charge of the SB900A lithium-ion battery. Single charge charging. SB900A battery via SBC10-100-US using AC power sources or USB ports. Specifications ULXD1-G50 Digital Wireless Bodypack Transmitter. Specifications: AUDIO INPUT: Connector: 4-pin mini-male (TA4M) Configuration: Unbalanced impedance: Maximum input signal 1 MΩ Level , 1 toHz at 1% THD: Pad Off: 8, 5 dBV (7, 5 Vpp) Pad On: 20, 5 dBV (30 Vpp) Input noise equivalent preamp (EIN), system gain setting = +20 (120 dBV A-weighted typical) RF OUTPUT: Connector: SMA Antenna Type: 1/4 wave Impedance: 50 ohms Occupied Bandwidth: <200 k
Hz Modulation Type: Shure Native Digital Power: 1m
W, 10m
W 20 m
W Frequency response of sound: from 20 Hz to 20 kHz (±1 dB) flat (depending on microphone type) Operating range: 300 ft (100 m) Connector: 3-pin TQG Gain offset range: 0 to 21 ind
B (in 3 inch increments
B) Battery type: Shure SB900 Rechargeable Li-ion or AA batteries. Dimensions (Hx
Wx
D): 3.4 x 2.6 x 0.9 inches. Weight: 142 g (5.0 oz) without batteries. Housing: Die-cast aluminum. Dual channel receiver ULXD4D-G50 series. Specifications: Radio carrier frequency range: 470-530 MHz. RF tuning step size: 25 kHz depends on the region. Image suppression:>70 dB typical RF sensitivity: −98 dBm at 10–5 BER. AUDIO DYNAMIC RANGE: *A-weighted , typical system gain @ +10 Analog XLR output: >120 dB Dante digital output: 130 dB Total harmonic distortion: −12 d input
BFS System Gain @ +10 System Audio Polarity: Positive pressure on the microphone diaphragm creates a positive voltage at pin 2 (relative to pin 3 of the XLR output) and tip of output 6 35 mm (1/4 inch). Dimensions: 44 x 482 x 274 mm. Weight: ULXD4D 3.36 kg (7.4 lbs) without antennas. Case: steel; Power requirements for extruded aluminum: 100 to 240 VAC 50–60 Hz, max. 0.26 A. RF INPUT: Spurious signal suppression:>80 dB Typical Connector Type: BNC Impedance: 50 ohms Bias Voltage: 12 to 13 VDC maximum 150 m
A per antenna CASCADE OUTPUT: Connector type: BNC Configuration: Unbalanced passive Impedance: 50 Ohm Insertion loss: 0 dB AUDIO OUTPUT gain adjustment range: –18 to +42 dB in 1 inch increments
B (plus mute setting) Impedance: 100 ohms FULL SCALE OUTPUT LINE setting: +18 dBV MIC setting: –12 dBV Microphone/line switch: Panel 30 dB Phantom power protection: Yes NETWORK Network interface: Dual-port Ethernet 10/100 Mbps , 1 Gbit/s Dante digital audio system Network addressing capability: DHCP or manual IP address Maximum cable length: 100 m (328 ft) SB900A Li-ion battery specifications Dimensions (Hx
Lx
D): 1.25 x 1.98 x 0.67 inches (31.8 x 50.4 x 17.5 mm) Constant charge voltage: 4 2V Constant charge current: 750mAh Nominal voltage: 3.7V Weight: 1.4oz (39 7 g) SBC210-US 2 Portable Charger Specifications -Bay Battery Type: Up to 2 Li-Ion Batteries (SB900) Charging Time: 50% = 1 hour; 100% = 3 hours Dimensions: 1 8 x 3.4 x 4.5 inches Weight: 15 0 oz. no batteries or external power supply PS51 Housing: Cast and extruded aluminum Power requirements: 5 5VDC, 2.72A Consumer Warning Please Note that some systems or transmitters operating in the frequency ranges 617–652 MHz or 663–698 MHz no longer comply with latest regulations established by the Federal Communications Commission (FCC).