Insta360 X3 lenses are sticky

Insta360 X3 Sticky Lens

With Insta360's lens protector, your camera lens is always protected from scratches. It sticks directly to the lens to protect it from dust and scratches.

Features:

• Protection for both your lenses.
• Protects lenses from dust or scratches.

  Specifications:

  Technical characteristics:

  • Material: polymethyl methacrylate (PMMA)
  • Weight: 1.5 g (0.05 oz) / 1 pc.
  • Dimensions (L x H): 34, 80 x 10, 95 mm (1, 37 x 0 43 inches)

    Notes:

  • Please make sure before use that the camera lens is clean and dry. Always install Lens Guard in a clean and dry environment. Check carefully for dust or other particles as they may affect the shooting results.
  • Before installation, make sure that the thin protection is installed on the side with the camera screen and the thick guard is used for the opposite side.
  • If you remove Lens Guard from X3 Apply new double-sided adhesive before reinstalling the Lens Guard.
  • Sticky Lens Guard is splash-proof only and is not intended for underwater photography. If you plan to use the X3 underwater Remove the Sticky Lens Guard and use the X3 Dive Case for best results.
  • To remove the lens guards, please use the included Triangle Prying Tool. Take care of that to avoid scratching the camera lenses when removing the lens guards.
  • To replace double-sided adhesives , first remove the used double-sided adhesives and make sure that the inside of the Lens Guard is clean and free of residue. Repeat the installation process , making sure that the notch on the Lens Guard rim is properly aligned.

    Contents:

    • 2x Adhesive Lens Protection
    • 6x Double Sided Adhesive Strips
    • 1x Triangle Pry Tool
    • 1x Lens Cloth

      Note:

      • Do not use adhesive lens protector in or near water.
      • Lens protector comes with double-sided adhesive strips already attached