TRIBORD Open Offshore 900 Dropseat، أحمر ناري/أسود/أصفر نيون

Waterproof
Three-layer membrane material with 30,000mm waterproof rating (JIS standard). The higher the pressure the more impenetrable the fabric is. The product has been successfully tested in a rain simulator with a rainfall of 450 l/m²/h for 24 hours (3 × 8 hours).

Waterproofness of the overalls
- Sealed seams.
- Waterproof zippers with a wide internal protective strip to prevent getting wet and improve water drainage
- Wide Velcro fasteners on the leg cuffs for individual adjustment
- The jumpsuit has a high collar in the chest area for good waterproofing.

Breathability
To measure the breathability of a fabric vapor permeability (RET value) is determined by testing in accordance with ISO 11092. This is the ability of a material to remove moisture from the body to the outside. The breathability of a fabric is determined by its vapor permeability (RET , test according to ISO 11092). The lower the RET value the more water vapor escapes and the more breathable the fabric becomes.
RET value = 25

Unisex jumpsuit
These jumpsuits are equally suitable for men and women. Has a zipper at the back and front for going to the toilet.
These overalls are individually adjustable (straps , waist), which provides a comfortable fit for men so do women.
All zippers are YKK Aqua brand
Guard.

Foam pad
Suit with foam padding in the knees and seat for greater comfort when performing maneuvers. The foam padding in the buttock area is removable.

Cargo pocket (thigh) with safety loop
Accessories (knife, camera temple opener, etc. d.) should be kept in a bag so as not to lose them at sea! For this purpose, there is a loop in the right cargo pocket.

Weight
Overalls size L weighs 1100 g.

Water-repellent coating
Water-repellent fabrics and fasteners.
The fabric is water repellent when water rolls off the surface without being absorbed.
Clothes do not absorb moisture but remains light and breathable. This property is achieved through appropriate surface treatment which, however should be updated from time to time.
To activate the water-repellent finish: Tumble dry clothes on low heat for 10 minutes.

Caring for overalls
Rinse with plenty of tap water including zippers to remove salt water.
Hang to dry in a ventilated place.
Place the jacket on the dryer and let it air dry. Be careful do not place your jacket on the heater!

How is water-repellent impregnation renewed? 1st step: before washing.
Close the zippers and the protective flap. Loosen the straps and elastic bands and empty the pockets.
Then turn the clothes inside out and wash them.
How water-repellent impregnation is renewed ? Step 2: Wash
The overalls can be washed with regular detergent at a temperature of 30 to 40 °C (Synthetic program). Do not use fabric softener or bleach to maintain the quality of the clothes.
Do not wrinkle the overalls too much when you put it in the washing machine (be sure to limit the load on the machine).
Very important: rinse thoroughly or run a second rinse to completely remove any detergent residue.
How water-repellent impregnation is renewed ? 3rd stage: drying
Drying is a decisive stage for the restoration of water-repellent properties.
Place the overalls on the dryer and let them air dry. Be careful don't let it dry out too long!
Place clothes in the dryer (Synthetics program) for 10–15 minutes and then turn the product right side out again. Be careful don't let it dry out too long.

For drying overalls
You can use a belt loop to hang the overalls on a hook or hanger so they can dry.

Material composition/ingredients:
Main fabric 100% Polyamide (PA) Back material 100% Polyethylene terephthalate (PET) Waist fabric 100% Polyethylene terephthalate (PET) Membrane 100% Polyurethane (PUR) Warm lining 100% Polyethylene terephthalate (PET)

Storage advice
Store in dry in a ventilated place and do not dry on a heater as this may damage the breathable membrane.