



عن
يتم تشكيل الوصف والاسم والعلامة التجارية لأغراض إعلامية من بيانات من متجر رسمي عبر الإنترنت في الخارج أو من موقع الشركة المصنعة.
العلامة التجارية: شور
الفئة: الميكروفونات
سلكي/لاسلكي: لاسلكي
النمط القطبي: قلبي الشكل
الفئة: الميكروفونات
سلكي/لاسلكي: لاسلكي
النمط القطبي: قلبي الشكل
يتم تشكيل الوصف والاسم والعلامة التجارية لأغراض إعلامية من بيانات من متجر رسمي عبر الإنترنت في الخارج أو من موقع الشركة المصنعة.
العلامة التجارية: شور
الفئة: الميكروفونات
سلكي/لاسلكي: لاسلكي
النمط القطبي: قلبي الشكل
الفئة: الميكروفونات
سلكي/لاسلكي: لاسلكي
النمط القطبي: قلبي الشكل
بواسطة
Shure
نظام الميكروفون اللاسلكي Shure QLXD14/SM35-G50
- سعر عادي
- AED 4,785.00
- سعر البيع
- AED 4,785.00
- سعر عادي
-
بالإضافة إلى ذلك، عند التسليم، سيتعين عليك دفع رسوم الجمارك وتكلفة التوصيل لآخر ميل حوالي ~237.17 AED.

معلومات التسعير والضرائب
يشمل السعر رسوم الوكالة وتكاليف النقل اللوجستي. يرجى ملاحظة أنه قد يتم الاتصال بك من قبل شركة لوجستية لدفع الرسوم الجمركية والتوصيل إلى الميل الأخير حسب نوع المنتج وسعره.
From USA
يتضمن السعر التسليم خلال 14 يوم عمل.
قد يزيد وقت التسليم اعتمادًا على خصوصيات النقل الدولي ومنطقة التسليم.

حدود
Equipment characteristics were generated using automatic translation from the seller’s website.
The QLXD14/SM35 wireless microphone system with SM35 headset microphone combines professional features with simplified setup and operation. SM35 Performance Headset Microphone Ideal for multi-instrumentalists and active performers who need their hands free. SM35 is lightweight and low profile so you can focus on your performance and your audience can enjoy it without being distracted. SM35 has a frame headset design which fits securely and comfortably ensuring long-lasting and reliable operation. This microphone also comes with a pair of replaceable snap-on windshields - the perfect accessory for minimizing the pickup of plosive sounds breath and wind noise and provide clear and intelligible sound. The SM35's tight unidirectional cardioid polar pattern lets you focus on the sound , which you want to write providing superior off-axis noise suppression preventing feedback from other electronic equipment such as floor monitors and minimizing signal leakage on stage. This makes it an ideal choice for a wide range of applications, from small clubs to large venues and even arena tours. Get even better placement with a flexible gooseneck microphone design which allows you to further isolate the sound from unwanted noise. QLXD1 Bodypack Transmitter Transparent 24-bit digital audio quality and incredibly efficient use of the radio frequency spectrum make the QLXD1 Bodypack Transmitter ideal for wirelessly transmitting vocals and instruments in presentation rooms. music venues houses of worship, etc. d. With a dynamic range of over 120 dB you don't have to adjust the transmitter gain. This beltpack also features 256-bit AES encryption giving you confidence in the safety of every transfer. This waist pack features an easy-to-read backlit display and is designed for intuitive and efficient use.. Use a selectable display mode To personalize the displayed settings, select the desired group/channel frequency or battery life (using optional Shure SB900B battery sold separately). QLXD1 quickly syncs with a wireless receiver via IR with the touch of a button and maintains clear continuous signal over the entire 100 m (330 ft) range without the need to adjust transmitter gain. The QLXD1 features an all-metal construction for durability and a wide selection of compatible microphones deliver legendary Shure sound. This bodypack also features a detachable quarter-wave antenna. In addition, QLXD1 is equipped with external charging contacts allowing you to charge it from the station. QLXD4 Digital Wireless Receiver Get the perfect balance of professional features and intuitive efficiency with the QLXD4 Digital Wireless Receiver. This receiver offers transparent 24-bit digital audio quality and incredibly efficient use of the radio spectrum. Optimize your workflow: quickly find open frequencies with automatic scanning and then transfer them to transmitters with one-touch IR sync. Experience advanced Ethernet networking capabilities. This allows you to use network channel scanning on multiple receivers Manage settings remotely from your computer via Wireless Workbench software integration and remote monitoring from i
OS devices is also available (via the Shure mobile app
Plus Channels). Learn more about QLX-D Digital Wireless Systems QLX-D Digital Wireless Systems provide higher wireless throughput in mid-sized sites without sacrificing signal. Optimizing multiple receiver setups. 24-bit digital audio and wide frequency range deliver sound with clarity and precision how it was reproduced. Wireless Workbench software provides real-time access monitoring and control throughout the entire work allowing you to control the system from your i
OS device for maximum convenience. Rechargeable lithium-ion battery option enhances on-stage performance. Features Shure QLXD14/SM35 Transparent 24-bit digital audio. Diversity of predictive digital switching. Easily pair transmitters and receivers via IR scanning and synchronization. Automatic channel scanning. Ethernet network for multi-receiver systems. Network channel scanning sets up open frequencies for network receivers. Elegant and easy to use. use an interface with a high-contrast LCD menu. Professional grade all-metal construction. Carrier range RF174–216 MHz , 470–865 MHz, 1492–1525 MHz, 1785–1805 MHz depends on the region. Operating range 100m (actual range depends on RF signal). absorption, reflection and interference) RF tuning step size 25 kHz depends on region Image suppression>70 dB typical value RF sensitivity -97 dBm at 10-5 BER Latency 120 dB A-weighted, typical total harmonic distortion (input –12 dBFS system gain at +10)<0 1% System Audio Polarity
Positive Pressure The microphone diaphragm creates a positive voltage at pin 2 (relative to pin 3 of the XLR output) and at the tip of output 6 35 mm (1/4 inch). Operating temperature range: 18°C to 50°C (battery specifications may limit this range). Storage temperature range: 29°C to 74°C (battery specifications may limit this range). QLXD1 microphone offset range: 0 to 21 in.
B (in 3 inches). in increments of dB) Battery type: Shure SB900B Li-ion rechargeable battery or AA battery 1.5H Dimensions: 86 x 65 x 23 mm (3.38 x 2.57 x 0.92 inches) H x W x D, excluding antenna Weight: 138 g (4.9 oz) no batteries Housing: Die-cast aluminum Audio input connector: 4-pin mini-male (TA4M) For detailed information see in the picture. Configuration: Unbalanced resistance: 1 MΩ. For more information, see in the picture. Maximum input level (1 kHz). at SOI 1%): 8 , 5 dBV (7 , 5 V peak-to-peak) Input noise equivalent to preamp (system gain setting ≥ +20): -120 dBV A-weighted typical RF Output Connector: SMA Antenna Type: 1/4 Wave Impedance: 50 ohms Occupied Bandwidth: 80 dB Typical Connector Type: BNC Resistance: 50 Ohms. Audio output gain adjustment range: -18 to +42 dB (in increments of 1 dB). 1/4" configuration (6 35mm): Impedance Balanced (Tip = Audio, Ring = No Audio sleeve = ground) XLR: balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6 35mm): 100 ohms (50 ohms, unbalanced) XLR: 100 ohms Full-scale output 1/4" (6 35 mm): + 12 in
BV XLR: LINE setting = +18 in
BV MIC setting = -12 in
BV Mic/line switch: 30 in panel
B Phantom power protection 1/4 inch (6 35mm): Yes XLR: Yes Network network interface: one Ethernet 10 port/ 100 Mbps network addressing capability: DHCP or manual IP address. Maximum cable length: 100 m (328 ft)
The QLXD14/SM35 wireless microphone system with SM35 headset microphone combines professional features with simplified setup and operation. SM35 Performance Headset Microphone Ideal for multi-instrumentalists and active performers who need their hands free. SM35 is lightweight and low profile so you can focus on your performance and your audience can enjoy it without being distracted. SM35 has a frame headset design which fits securely and comfortably ensuring long-lasting and reliable operation. This microphone also comes with a pair of replaceable snap-on windshields - the perfect accessory for minimizing the pickup of plosive sounds breath and wind noise and provide clear and intelligible sound. The SM35's tight unidirectional cardioid polar pattern lets you focus on the sound , which you want to write providing superior off-axis noise suppression preventing feedback from other electronic equipment such as floor monitors and minimizing signal leakage on stage. This makes it an ideal choice for a wide range of applications, from small clubs to large venues and even arena tours. Get even better placement with a flexible gooseneck microphone design which allows you to further isolate the sound from unwanted noise. QLXD1 Bodypack Transmitter Transparent 24-bit digital audio quality and incredibly efficient use of the radio frequency spectrum make the QLXD1 Bodypack Transmitter ideal for wirelessly transmitting vocals and instruments in presentation rooms. music venues houses of worship, etc. d. With a dynamic range of over 120 dB you don't have to adjust the transmitter gain. This beltpack also features 256-bit AES encryption giving you confidence in the safety of every transfer. This waist pack features an easy-to-read backlit display and is designed for intuitive and efficient use.. Use a selectable display mode To personalize the displayed settings, select the desired group/channel frequency or battery life (using optional Shure SB900B battery sold separately). QLXD1 quickly syncs with a wireless receiver via IR with the touch of a button and maintains clear continuous signal over the entire 100 m (330 ft) range without the need to adjust transmitter gain. The QLXD1 features an all-metal construction for durability and a wide selection of compatible microphones deliver legendary Shure sound. This bodypack also features a detachable quarter-wave antenna. In addition, QLXD1 is equipped with external charging contacts allowing you to charge it from the station. QLXD4 Digital Wireless Receiver Get the perfect balance of professional features and intuitive efficiency with the QLXD4 Digital Wireless Receiver. This receiver offers transparent 24-bit digital audio quality and incredibly efficient use of the radio spectrum. Optimize your workflow: quickly find open frequencies with automatic scanning and then transfer them to transmitters with one-touch IR sync. Experience advanced Ethernet networking capabilities. This allows you to use network channel scanning on multiple receivers Manage settings remotely from your computer via Wireless Workbench software integration and remote monitoring from i
OS devices is also available (via the Shure mobile app
Plus Channels). Learn more about QLX-D Digital Wireless Systems QLX-D Digital Wireless Systems provide higher wireless throughput in mid-sized sites without sacrificing signal. Optimizing multiple receiver setups. 24-bit digital audio and wide frequency range deliver sound with clarity and precision how it was reproduced. Wireless Workbench software provides real-time access monitoring and control throughout the entire work allowing you to control the system from your i
OS device for maximum convenience. Rechargeable lithium-ion battery option enhances on-stage performance. Features Shure QLXD14/SM35 Transparent 24-bit digital audio. Diversity of predictive digital switching. Easily pair transmitters and receivers via IR scanning and synchronization. Automatic channel scanning. Ethernet network for multi-receiver systems. Network channel scanning sets up open frequencies for network receivers. Elegant and easy to use. use an interface with a high-contrast LCD menu. Professional grade all-metal construction. Carrier range RF174–216 MHz , 470–865 MHz, 1492–1525 MHz, 1785–1805 MHz depends on the region. Operating range 100m (actual range depends on RF signal). absorption, reflection and interference) RF tuning step size 25 kHz depends on region Image suppression>70 dB typical value RF sensitivity -97 dBm at 10-5 BER Latency 120 dB A-weighted, typical total harmonic distortion (input –12 dBFS system gain at +10)<0 1% System Audio Polarity
Positive Pressure The microphone diaphragm creates a positive voltage at pin 2 (relative to pin 3 of the XLR output) and at the tip of output 6 35 mm (1/4 inch). Operating temperature range: 18°C to 50°C (battery specifications may limit this range). Storage temperature range: 29°C to 74°C (battery specifications may limit this range). QLXD1 microphone offset range: 0 to 21 in.
B (in 3 inches). in increments of dB) Battery type: Shure SB900B Li-ion rechargeable battery or AA battery 1.5H Dimensions: 86 x 65 x 23 mm (3.38 x 2.57 x 0.92 inches) H x W x D, excluding antenna Weight: 138 g (4.9 oz) no batteries Housing: Die-cast aluminum Audio input connector: 4-pin mini-male (TA4M) For detailed information see in the picture. Configuration: Unbalanced resistance: 1 MΩ. For more information, see in the picture. Maximum input level (1 kHz). at SOI 1%): 8 , 5 dBV (7 , 5 V peak-to-peak) Input noise equivalent to preamp (system gain setting ≥ +20): -120 dBV A-weighted typical RF Output Connector: SMA Antenna Type: 1/4 Wave Impedance: 50 ohms Occupied Bandwidth: 80 dB Typical Connector Type: BNC Resistance: 50 Ohms. Audio output gain adjustment range: -18 to +42 dB (in increments of 1 dB). 1/4" configuration (6 35mm): Impedance Balanced (Tip = Audio, Ring = No Audio sleeve = ground) XLR: balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6 35mm): 100 ohms (50 ohms, unbalanced) XLR: 100 ohms Full-scale output 1/4" (6 35 mm): + 12 in
BV XLR: LINE setting = +18 in
BV MIC setting = -12 in
BV Mic/line switch: 30 in panel
B Phantom power protection 1/4 inch (6 35mm): Yes XLR: Yes Network network interface: one Ethernet 10 port/ 100 Mbps network addressing capability: DHCP or manual IP address. Maximum cable length: 100 m (328 ft)