عن
الموديل: كتلة التنغستن الأصلية
الموديل: كتلة التنغستن الأصلية
كتلة تنجستن فلويد روز الأصلية، كتلة تنجستن أصلية مقاس 42 مم
- سعر عادي
- AED 913.00
- سعر البيع
- AED 913.00
- سعر عادي
-
بالإضافة إلى ذلك، عند التسليم، سيتعين عليك دفع رسوم الجمارك وتكلفة التوصيل لآخر ميل حوالي ~60.64 AED.
Our exclusive tungsten sustain blocks for the Floyd Rose tremolo bridge are the highest density available in the block that matches the original size specifications of your Floyd Rose bridge. When it comes to sustainability , the most important property of a metal is its density followed by hardness. Tungsten is more than 4 times denser than titanium and more than twice as dense as brass. To match the weight of our tungsten sustainblock you will need a titanium block 4 times the size of our tungsten block and a brass block twice the size of our tungsten block.
Most standard tremolo spring chambers are simply not large enough. for placing bulky sustain blocks sold by other companies. Our block is a direct replacement for the standard sustain block increasing the weight of your bridge to half a pound.
Why density and mass are important for sound and sustain ? Fixed guitar bridge effectively transfers string vibration from the bridge to the body through a large contact area but the tremolo bridge is limited to a few very small attachment points. The tremolo springs cause the bridge to lose most of its resonance. because springs absorb and dissipate vibration very well. This is one of the reasons according to which expensive studio microphones are suspended on springs to isolate external vibrations. High density sustain block means more mass which means less string vibration transferred to the springs and more to the bridge to which it belongs.
Soft metals absorb sound and dampen sustain. Tungsten is much harder than steel and titanium and more than twice as hard as brass. No other sustain block offers the perfect combination of mass and firmness.
With our tungsten sustain block, every note will be brighter and clarity and sustain will increase noticeably.
Same thickness same as the standard Floyd Rose sustain block. The distance between the centers of the outer screw holes is 1 , 345 inches / 34 mm.
These blocks fit the Original 6- and 7-string series and for the Special, the Special Series 6-String Tremolo and 1000 Series 7-String Tremolo System have sustain block mounting hole spacing which is unlike any of our other systems - see. ? ? for these breeches.
To find out To find out which sustain block is right for your bridge, see ? b.